Keto Ply Logo

+91 7400364631

info@ketoply.com

Block Board Manufacturers in Gujarat

Keto Ply manufactures IS 1659 block board at Yamunanagar on kiln and air seasoned pinewood and hardwood battens, and supplies it across Gujarat to Ahmedabad and Surat wardrobe shutters, Rajkot and Vadodara workshops and institutional joinery statewide, in 12 mm to 25 mm boards.

  • Manufacturing Since 25+ Years
  • IS 1659 Block Board
  • Kiln & Air Seasoned Battens
  • Termite & Borer Proof
  • Pan-Gujarat Dispatch
Block Board Block Board Manufacturers in Gujarat

Keto Block Board

IS 1659 | Batten Core | 12 mm to 25 mm

Block Board Suppliers in Gujarat
IS 1659 Block Board Plywood

Block Board Suppliers in Gujarat

Block board exists for one reason: span. A seven foot wardrobe shutter or an eight foot table top cut from plywood will bow in time, because a veneer core has nothing running the length of the board to carry that load. A block board does, and its solid timber battens work like a row of small joists. Gujarat has one of the busiest furniture trades in the country, and a large share of it is exactly the work block board is for: wardrobe and door shutters, office table tops, showroom counters and long shelving. The state's dry heat also punishes badly seasoned battens, which is where the 12 percent moisture cap in IS 1659 stops being a formality. Keto Ply rips pinewood and hardwood timber for its block boards and seasons it by kiln and air before pressing, and IS 1659 sets the rest: battens no wider than 30 mm, laid edge to edge without significant gaps, seasoned to not more than 12 percent moisture.

  • IS 1659 Block Board, 72 Hour Boil Tested
  • High Density Hardwood Core, Full Panel Veneers
  • Kiln Plus Air Seasoned Pinewood & Hardwood
  • Direct Site Dispatch Across Gujarat
Get a Quote
Quality Assurance

Why Gujarat carpenters and contractors use Keto Block Board

Seasoned Before Pressing

Pinewood and hardwood timber is ripped and then seasoned by kiln and air, so the battens are stable before they ever go into a board.

Gap Free Batten Core

Battens no wider than 30 mm laid edge to edge as IS 1659 requires, so there are no hollow pockets to telegraph through a laminated face.

Site Ready Dispatch

Full truck and part load consignments to Ahmedabad, Surat, Vadodara, Rajkot and North Gujarat workshops and sites, scheduled against the site programme.

Warranty Backed

Every Keto Ply panel carries the brand's borer, fungus and anti-termite guarantee in writing.

Product Features

Features of Keto Block Board

What a batten core does on a Gujarat furniture job, where it beats plywood, and where it does not.

Request a Sample Board
01

A core that carries the span

The battens run the length of the board like a row of small joists, which is what keeps a seven foot wardrobe shutter or a long table top from bowing. A veneer core has nothing running that way and will sag over the same span.

02

Battens laid edge to edge, no hollows

IS 1659 caps batten width at 30 mm and requires them laid edge to edge without significant gaps. That is what stops a shutter showing hollow lines through laminate a year after it is fitted, and it is the first thing to check on a cheap board.

03

Kiln plus air seasoned timber

Keto Ply rips pinewood and hardwood and seasons it by kiln and air before pressing. IS 1659 requires core battens at not more than 12 percent moisture, because timber that goes in wet shrinks later and opens gaps inside a finished board.

04

Lighter shutters, easier on hardware

A block board weighs noticeably less than plywood of the same thickness, which matters on full height wardrobe shutters and flush doors where the hinges carry that weight every day for years.

05

Where block board beats plywood, and where it does not

Wardrobe and door shutters, office tops, showroom counters and long shelving statewide. Stay with plywood for small carcass boxes and drawer units, where screws land in the board edge.

06

Direct from manufacturer pricing

Supplied from the Yamunanagar unit with dealer, workshop and project pricing for Gujarat, plus dealership openings in uncovered districts.

Technical Specifications

Grade
MR Grade Block Board as per IS 1659 (BWP grade on request)
Core
Solid Pinewood & Hardwood Battens, Laid Edge to Edge
Timber Seasoning
Kiln Seasoning Plus Air Seasoning Before Pressing
Batten Width
Not Exceeding 30 mm as per IS 1659
Batten Moisture Content
Not Exceeding 12% as per IS 1659
Face Veneers
Selected Hardwood, Sanded for Laminate & Veneer
Standard Thickness
12mm, 15mm, 19mm, 25mm
Standard Sizes (Ft)
8x4, 8x3, 7x4, 7x3
Protection
Termite Proof, Borer Proof, Anti-Fungus Treated
Ideal Applications
Wardrobe & Door Shutters, Long Shelving, Tables, Partitions
Standards

What IS 1659 requires of block board

Acceptance values laid down in IS 1659 (Block Boards - Specification).

Test Method Requirement What it means on site
Batten Core IS 1659 cl 6.2 Battens not exceeding 30 mm wide, laid edge to edge without significant gaps No hollow pockets to telegraph through a laminated face.
Batten Seasoning IS 1659 cl 6.2 Core battens seasoned to not more than 12% moisture Timber that will not shrink and open gaps inside the finished board.
Water Resistance (MR) IS 1659 cl 9.2.2.2 Soaked 3 hours in water at 60°C The bond holds through the damp and dry cycling of an interior.
Water Resistance (BWP) IS 1659 cl 9.2.2.1 Soaked 72 hours in boiling water The step up grade for humid and exterior use.
Glue Adhesion IS 1659 Annex G Knife test, pass standard minimum with adherent fibres The plies tear wood rather than splitting cleanly at the glue line.
Bending Strength (MR) IS 1659 Annex J MOR 40 N/mm² average; MOE 4000 N/mm² average A long shutter or shelf carries its own span without bowing.

These are the published IS 1659 acceptance criteria for block boards. The lot specific test report is issued with every project consignment.

Where It Is Used

Where block board is used in Gujarat

Wardrobe & Loft Shutters Flat and villa fit-outs across Ahmedabad, Surat and Rajkot.
Door Shutters & Flush Doors Internal shutters in residential and commercial projects.
Office Tables & Workstations SG Highway, GIFT City belt and Vadodara tops.
Showroom Counters & Display Tops Retail and trade counters spanning without support.
Long Span Shelving Storage, library and display shelving.
School, Hostel & College Furniture Cupboards, benches and long tables across the state.
Coverage

Our block board network in Gujarat

Dealer supply and direct project dispatch across the state's construction corridors:

Not seeing your area? Keto Ply is appointing dealers across Gujarat districts. Send a dealership enquiry and our territory manager will call back.

Questions

Block board in Gujarat: FAQs

Keto Ply manufactures block board at its Yamunanagar, Haryana unit and supplies it across Gujarat through dealers and direct project dispatch. The brand has 25+ years in plywood, block board and flush door manufacturing.

Plywood is built from layers of veneer glued at right angles. Block board has a core of solid timber battens laid edge to edge along the length of the board, with veneer faces on both sides. The battens run the length of the panel and carry the span, which is why block board resists bowing on long shutters and tops, and why it weighs less than plywood of the same thickness.

IS 1659, Block Boards - Specification. It defines the MR and BWP grades, caps core batten width at 30 mm, requires battens laid edge to edge without significant gaps and seasoned to not more than 12 percent moisture, and sets bending strength at 40 N per square mm modulus of rupture for MR grade.

Use block board where the panel has to span: full height wardrobe shutters, door shutters, long shelves, table tops and partitions. Stay with plywood for small carcass boxes, drawer units and anywhere screws land in the board edge across the battens, because plywood holds a screw better there.

It affects badly seasoned block board. Battens that go into a board above 12 percent moisture shrink afterwards and open gaps inside the panel, which shows as hollows under laminate. IS 1659 caps core batten moisture at 12 percent, and Keto Ply seasons its timber by kiln and air before pressing.

Block board is supplied in 12mm, 15mm, 19mm and 25mm thickness, in 8x4, 8x3, 7x4 and 7x3 ft sheets. Wardrobe and door shutters usually run on 19mm, with 25mm for heavy table tops and long unsupported shelving.

Pinewood and hardwood, ripped and then seasoned by kiln and air before pressing. The board carries the Keto Ply termite, borer and anti-fungus protection, and warranty coverage applies across the product range.

Yes. Full truck and part load consignments are dispatched to Ahmedabad, Surat, Vadodara, Rajkot, Gandhinagar, Bharuch, Mehsana and other Gujarat districts, scheduled against the site programme.

Share thickness, sheet size, total quantity in square feet and the delivery pin code on WhatsApp at +91-7400364631 or call us directly. Project and workshop rates are quoted the same working day.

Keto Ply is appointing dealers and distributors across Gujarat districts. Send your firm name, city and current brand portfolio on WhatsApp at +91-7400364631 and the territory manager will get in touch.

Need block board rates for Gujarat?

Share your thickness, square footage and delivery city. We will send the price list along with the current test certificate.

Call Now WhatsApp