Keto Ply manufactures pressure impregnated fire retardant plywood at Yamunanagar and supplies it across Baran to district office and school projects, mandi and trading premises and the Anta and Chhabra belt, in 4 mm to 25 mm boards.
IS 5509 | BWR Bonded | 4 mm to 25 mm
Baran anchors the eastern edge of the Hadoti region, and its building work is led by government offices, schools and hostels, health facilities and the agricultural mandi trade that moves soybean, garlic and grain through the district. Public buildings and grain premises both carry fire risk that the district administration takes seriously, and an FR grade panel specified into the joinery is the straightforward way to satisfy it. Keto Ply fire retardant plywood is treated by pressure impregnation before pressing, so the retardant chemistry sits inside the veneer rather than on top of it. Sanding, cutting and edge banding on site do not remove the protection.
Flammability, flame penetration and rate of burning checks are run on production batches before the consignment is dispatched.
Chemistry impregnated right through the veneer, so cutting and sanding on site never exposes untreated wood underneath.
Direct dispatch to Baran, Anta, Chhabra, Atru and Mangrol sites, with delivery scheduled against the site programme.
Every Keto Ply panel carries the brand's borer, fungus and anti-termite guarantee in writing.
Six things Baran contractors, PWD engineers and turnkey joinery firms check before a panel goes into a fire clearance drawing, and how Keto FR plywood answers each one.
Request a Sample BoardRetardant salts are driven into the veneer under pressure before pressing, so the board resists ignition through its full section instead of only at the face.
Once the flame source is removed, treated veneers char instead of continuing to burn. That is the mechanism behind the IS 5509 flammability and rate of burning criteria.
Baran summers run hot and dry, which pulls moisture out of untreated timber and leaves it quick to catch. Pressure impregnation puts the retardant inside the veneer and BWR bonding holds the glue line through the monsoon that follows.
The same treatment cycle carries the Keto Ply anti-termite and anti-fungus guarantee, so one panel handles both fire and biological protection.
Kiln plus air seasoning and calibrated sanding hold thickness within IS tolerance, so laminate and veneer lay flat across large wall panels and shutters.
Supplied from the Yamunanagar unit with dealer and project pricing for Baran, plus dealership openings across the Kota and Jhalawar belt.
Acceptance values laid down in IS 5509 (Fire Retardant Plywood - Specification), tested as per IS 1734 (Part 3).
| Test | Method | Requirement | What it means on site |
|---|---|---|---|
| Flammability | IS 1734 (Part 3) | Second ignition not before 30 minutes | The panel resists re-ignition through half an hour of direct exposure. |
| Flame Penetration | IS 1734 (Part 3) | Minimum 15 minutes for every 6 mm thickness | A 12 mm board resists burn through for roughly 30 minutes. |
| Rate of Burning | IS 1734 (Part 3) | 30% to 70% weight loss in not less than 20 minutes | Combustion proceeds slowly, which buys evacuation time. |
| Bonding / Adhesion | IS 303 - BWR Grade | Pass | Boiling water resistant glue line, required for treatability. |
These are the published IS 5509 acceptance criteria for fire retardant plywood. The lot specific third party test certificate is issued with every project consignment.
Dealer supply and direct project dispatch across the district:
Not seeing your area? Keto Ply is appointing dealers across Baran and the Hadoti region. Send a dealership enquiry and our territory manager will call back.
Share your thickness, square footage and delivery city. We will send the price list along with the current test certificate.
