Keto Ply manufactures pressure impregnated fire retardant plywood at Yamunanagar and supplies it across Gujarat to Ahmedabad commercial towers, Surat textile and diamond trade buildings, Vadodara and Rajkot institutional work and the North Gujarat belt, in 4 mm to 25 mm boards.
IS 5509 | BWR Bonded | 4 mm to 25 mm
Gujarat enforces fire safety through the Gujarat Fire Prevention and Life Safety Measures Act, and the fire NOC is a live gate on occupancy for every high rise, commercial building and assembly occupancy in the state. The SG Highway corridor in Ahmedabad, the diamond and textile trade buildings in Surat, and the institutional and hospitality stock across Vadodara, Rajkot and North Gujarat all put panel material where a fire consultant will look at it first. Keto Ply fire retardant plywood is treated by pressure impregnation before pressing, so the retardant chemistry sits inside the veneer rather than on top of it. Sanding, cutting and edge banding on site do not remove the protection.
Flammability, flame penetration and rate of burning checks are run on production batches before the consignment is dispatched.
Chemistry impregnated right through the veneer, so cutting and sanding on site never exposes untreated wood underneath.
Full truck and part load consignments to Ahmedabad, Surat, Vadodara, Rajkot and North Gujarat project sites, scheduled against the site programme.
Every Keto Ply panel carries the brand's borer, fungus and anti-termite guarantee in writing.
Six things Gujarat architects, PMCs and turnkey contractors check before a panel goes into a fire clearance drawing, and how Keto FR plywood answers each one.
Request a Sample BoardRetardant salts are driven into the veneer under pressure before pressing, so the board resists ignition through its full section instead of only at the face.
Once the flame source is removed, treated veneers char instead of continuing to burn. That is the mechanism behind the IS 5509 flammability and rate of burning criteria.
Boiling water resistant bonding keeps the plies intact through humid coastal air in Surat, Bharuch and Jamnagar and the dry heat swings of Banaskantha and Kutch, where MR grade boards fail at both extremes.
The same treatment cycle carries the Keto Ply anti-termite and anti-fungus guarantee, so one panel handles both fire and biological protection.
Kiln plus air seasoning and calibrated sanding hold thickness within IS tolerance, so laminate and veneer lay flat across large wall panels and shutters.
Supplied from the Yamunanagar unit with dealer and project pricing for Gujarat, plus dealership openings in uncovered districts.
Acceptance values laid down in IS 5509 (Fire Retardant Plywood - Specification), tested as per IS 1734 (Part 3).
| Test | Method | Requirement | What it means on site |
|---|---|---|---|
| Flammability | IS 1734 (Part 3) | Second ignition not before 30 minutes | The panel resists re-ignition through half an hour of direct exposure. |
| Flame Penetration | IS 1734 (Part 3) | Minimum 15 minutes for every 6 mm thickness | A 12 mm board resists burn through for roughly 30 minutes. |
| Rate of Burning | IS 1734 (Part 3) | 30% to 70% weight loss in not less than 20 minutes | Combustion proceeds slowly, which buys evacuation time. |
| Bonding / Adhesion | IS 303 - BWR Grade | Pass | Boiling water resistant glue line, required for treatability. |
These are the published IS 5509 acceptance criteria for fire retardant plywood. The lot specific third party test certificate is issued with every project consignment.
Dealer supply and direct project dispatch across the state's construction corridors:
Not seeing your area? Keto Ply is appointing dealers across Gujarat districts. Send a dealership enquiry and our territory manager will call back.
Share your thickness, square footage and delivery city. We will send the price list along with the current test certificate.
